Orbit Research Associates Private Limited

A versatile reactor for any type of static corrosion samples

• Hydrogen Sulfide high concentration media
• Volume : 1 to 50 liters
• MOC: hastelloy, titanium, special coating...
• Optional stirring.
• Easy closure equipment
• Control and Acquisition under Lab view.
• In compliance with PED 97/23 and any standard on requirement.

• 220 bar / 360 ° C
• Any type of corrosion standard samples: CRT, FFL, CT, U-Bent ....
• Radial reactor providing bigger area for sensors and gauges.
• Electrical insulation of electric tubes and passages followed by cracking RFP.
• Force sensors, displacement, stress ...
• Tests under constant load, cyclic stress or fatigue.
• Control and Acquisition under Lab view.

• A Taylor-made bench reactor allows testing stress corrosion by gas pressurization of tubing sample up to 1200 bar and temperatures up to 800 ° C.
• Strain and tubing dimensions can be analyzed by sensors displacement or lasers measurements.
• Any gas, sour or non-sour, inner or outer pressure ( colapsus)
• The tests can be performed either by a control on the pressure (constant pressure, with ramps, steps, relaxation ...) by a control of the radius deformation or by measuring external diameter with constant or slow strain rate.

• Re-circulating or multi-phases test loop.
• Loop full flow mixing with continuous analysis.
• PWR environment 360°C and 200 bar. Lithium Bore, H2 media. (Circulating pump, heater, cooler, full trace)
• Flow: 5 to 20 Liters / hour.
• Reactor's volume 4 to 40 liters Stainless steel or Hastelloy C276.
• Control and Acquisition of various parameters through a specific development oversight Lab view.